Greek languageBR2 VERTICAL MOVEMENT - 6-m Rail Cutting and Fitting Instructions
- Ι. CUTTING
- Before cutting it, we slightly push the roll so that its distance from the surface of the profile of the screening-dragging handle is approximately 3 mm.
- The smallest possible dimension for the screening roll cutting is 60 cm. We can cut the roll at a smaller length, if we first shorten the length of the spring.
- (A) We measure the width of the window and subtract 13 mm.
- (B)In order to calculate the length at which the 2 lateral profiles (guides) will be cut, we measure the height of the window and subtract 47mm.
- ΙΙ. SPRING ADJUSTMENT
| Window Width | Spring Turns | Door Width | Spring Turns |
|---|---|---|---|
| 60 cm | 8 | 60 cm | 10 |
| 80 cm | 8 | 80 cm | 10 |
| 100 cm | 10 | 100 cm | 12 |
| 120 cm | 12 | 120 cm | 14 |
| 140 cm | 14 | 140 cm | 16 |
| 160 cm | 17 | 160 cm | 19 |
| 180 cm | 19 | 180 cm | 21 |
- Fitting Instructions
- 1(b). First place the screening profile (1), screwing it on to the left and right grooves of the plastic caps (7) using screws and moly plugs.
- 2(b). Slide in the stop regulators (9) at the lower part of the guides (3), the large surface facing toward the inside of the opening.
- 3(b). Place the guides, by adjusting them on the upper part of the special plastic cap (7) groove.
- 4(b). Screw on the guides, by using the special plastic (guide alignment plug) (14), which separatesthe weather strip providing better access to the back of the guide.
